]> git.imager.perl.org - imager.git/blob - ppport.h
more test entries
[imager.git] / ppport.h
1
2 /* ppport.h -- Perl/Pollution/Portability Version 2.011 
3  *
4  * Automatically Created by Devel::PPPort on Thu Apr 22 16:13:04 2004 
5  *
6  * Do NOT edit this file directly! -- Edit PPPort.pm instead.
7  *
8  * Version 2.x, Copyright (C) 2001, Paul Marquess.
9  * Version 1.x, Copyright (C) 1999, Kenneth Albanowski.
10  * This code may be used and distributed under the same license as any
11  * version of Perl.
12  * 
13  * This version of ppport.h is designed to support operation with Perl
14  * installations back to 5.004, and has been tested up to 5.8.1.
15  *
16  * If this version of ppport.h is failing during the compilation of this
17  * module, please check if a newer version of Devel::PPPort is available
18  * on CPAN before sending a bug report.
19  *
20  * If you are using the latest version of Devel::PPPort and it is failing
21  * during compilation of this module, please send a report to perlbug@perl.com
22  *
23  * Include all following information:
24  *
25  *  1. The complete output from running "perl -V"
26  *
27  *  2. This file.
28  *
29  *  3. The name & version of the module you were trying to build.
30  *
31  *  4. A full log of the build that failed.
32  *
33  *  5. Any other information that you think could be relevant.
34  *
35  *
36  * For the latest version of this code, please retreive the Devel::PPPort
37  * module from CPAN.
38  * 
39  */
40
41 /*
42  * In order for a Perl extension module to be as portable as possible
43  * across differing versions of Perl itself, certain steps need to be taken.
44  * Including this header is the first major one, then using dTHR is all the
45  * appropriate places and using a PL_ prefix to refer to global Perl
46  * variables is the second.
47  *
48  */
49
50
51 /* If you use one of a few functions that were not present in earlier
52  * versions of Perl, please add a define before the inclusion of ppport.h
53  * for a static include, or use the GLOBAL request in a single module to
54  * produce a global definition that can be referenced from the other
55  * modules.
56  * 
57  * Function:            Static define:           Extern define:
58  * newCONSTSUB()        NEED_newCONSTSUB         NEED_newCONSTSUB_GLOBAL
59  *
60  */
61  
62
63 /* To verify whether ppport.h is needed for your module, and whether any
64  * special defines should be used, ppport.h can be run through Perl to check
65  * your source code. Simply say:
66  * 
67  *      perl -x ppport.h *.c *.h *.xs foo/bar*.c [etc]
68  * 
69  * The result will be a list of patches suggesting changes that should at
70  * least be acceptable, if not necessarily the most efficient solution, or a
71  * fix for all possible problems. It won't catch where dTHR is needed, and
72  * doesn't attempt to account for global macro or function definitions,
73  * nested includes, typemaps, etc.
74  * 
75  * In order to test for the need of dTHR, please try your module under a
76  * recent version of Perl that has threading compiled-in.
77  *
78  */ 
79
80
81 /*
82 #!/usr/bin/perl
83 @ARGV = ("*.xs") if !@ARGV;
84 %badmacros = %funcs = %macros = (); $replace = 0;
85 foreach (<DATA>) {
86         $funcs{$1} = 1 if /Provide:\s+(\S+)/;
87         $macros{$1} = 1 if /^#\s*define\s+([a-zA-Z0-9_]+)/;
88         $replace = $1 if /Replace:\s+(\d+)/;
89         $badmacros{$2}=$1 if $replace and /^#\s*define\s+([a-zA-Z0-9_]+).*?\s+([a-zA-Z0-9_]+)/;
90         $badmacros{$1}=$2 if /Replace (\S+) with (\S+)/;
91 }
92 foreach $filename (map(glob($_),@ARGV)) {
93         unless (open(IN, "<$filename")) {
94                 warn "Unable to read from $file: $!\n";
95                 next;
96         }
97         print "Scanning $filename...\n";
98         $c = ""; while (<IN>) { $c .= $_; } close(IN);
99         $need_include = 0; %add_func = (); $changes = 0;
100         $has_include = ($c =~ /#.*include.*ppport/m);
101
102         foreach $func (keys %funcs) {
103                 if ($c =~ /#.*define.*\bNEED_$func(_GLOBAL)?\b/m) {
104                         if ($c !~ /\b$func\b/m) {
105                                 print "If $func isn't needed, you don't need to request it.\n" if
106                                 $changes += ($c =~ s/^.*#.*define.*\bNEED_$func\b.*\n//m);
107                         } else {
108                                 print "Uses $func\n";
109                                 $need_include = 1;
110                         }
111                 } else {
112                         if ($c =~ /\b$func\b/m) {
113                                 $add_func{$func} =1 ;
114                                 print "Uses $func\n";
115                                 $need_include = 1;
116                         }
117                 }
118         }
119
120         if (not $need_include) {
121                 foreach $macro (keys %macros) {
122                         if ($c =~ /\b$macro\b/m) {
123                                 print "Uses $macro\n";
124                                 $need_include = 1;
125                         }
126                 }
127         }
128
129         foreach $badmacro (keys %badmacros) {
130                 if ($c =~ /\b$badmacro\b/m) {
131                         $changes += ($c =~ s/\b$badmacro\b/$badmacros{$badmacro}/gm);
132                         print "Uses $badmacros{$badmacro} (instead of $badmacro)\n";
133                         $need_include = 1;
134                 }
135         }
136         
137         if (scalar(keys %add_func) or $need_include != $has_include) {
138                 if (!$has_include) {
139                         $inc = join('',map("#define NEED_$_\n", sort keys %add_func)).
140                                "#include \"ppport.h\"\n";
141                         $c = "$inc$c" unless $c =~ s/#.*include.*XSUB.*\n/$&$inc/m;
142                 } elsif (keys %add_func) {
143                         $inc = join('',map("#define NEED_$_\n", sort keys %add_func));
144                         $c = "$inc$c" unless $c =~ s/^.*#.*include.*ppport.*$/$inc$&/m;
145                 }
146                 if (!$need_include) {
147                         print "Doesn't seem to need ppport.h.\n";
148                         $c =~ s/^.*#.*include.*ppport.*\n//m;
149                 }
150                 $changes++;
151         }
152         
153         if ($changes) {
154                 open(OUT,">/tmp/ppport.h.$$");
155                 print OUT $c;
156                 close(OUT);
157                 open(DIFF, "diff -u $filename /tmp/ppport.h.$$|");
158                 while (<DIFF>) { s!/tmp/ppport\.h\.$$!$filename.patched!; print STDOUT; }
159                 close(DIFF);
160                 unlink("/tmp/ppport.h.$$");
161         } else {
162                 print "Looks OK\n";
163         }
164 }
165 __DATA__
166 */
167
168 #ifndef _P_P_PORTABILITY_H_
169 #define _P_P_PORTABILITY_H_
170
171 #ifndef PERL_REVISION
172 #   ifndef __PATCHLEVEL_H_INCLUDED__
173 #       define PERL_PATCHLEVEL_H_IMPLICIT
174 #       include <patchlevel.h>
175 #   endif
176 #   if !(defined(PERL_VERSION) || (defined(SUBVERSION) && defined(PATCHLEVEL)))
177 #       include <could_not_find_Perl_patchlevel.h>
178 #   endif
179 #   ifndef PERL_REVISION
180 #       define PERL_REVISION    (5)
181         /* Replace: 1 */
182 #       define PERL_VERSION     PATCHLEVEL
183 #       define PERL_SUBVERSION  SUBVERSION
184         /* Replace PERL_PATCHLEVEL with PERL_VERSION */
185         /* Replace: 0 */
186 #   endif
187 #endif
188
189 #define PERL_BCDVERSION ((PERL_REVISION * 0x1000000L) + (PERL_VERSION * 0x1000L) + PERL_SUBVERSION)
190
191 /* It is very unlikely that anyone will try to use this with Perl 6 
192    (or greater), but who knows.
193  */
194 #if PERL_REVISION != 5
195 #       error ppport.h only works with Perl version 5
196 #endif /* PERL_REVISION != 5 */
197
198 #ifndef ERRSV
199 #       define ERRSV perl_get_sv("@",FALSE)
200 #endif
201
202 #if (PERL_VERSION < 4) || ((PERL_VERSION == 4) && (PERL_SUBVERSION <= 5))
203 /* Replace: 1 */
204 #       define PL_Sv            Sv
205 #       define PL_compiling     compiling
206 #       define PL_copline       copline
207 #       define PL_curcop        curcop
208 #       define PL_curstash      curstash
209 #       define PL_defgv         defgv
210 #       define PL_dirty         dirty
211 #       define PL_dowarn        dowarn
212 #       define PL_hints         hints
213 #       define PL_na            na
214 #       define PL_perldb        perldb
215 #       define PL_rsfp_filters  rsfp_filters
216 #       define PL_rsfpv         rsfp
217 #       define PL_stdingv       stdingv
218 #       define PL_sv_no         sv_no
219 #       define PL_sv_undef      sv_undef
220 #       define PL_sv_yes        sv_yes
221 /* Replace: 0 */
222 #endif
223
224 #ifdef HASATTRIBUTE
225 #  if (defined(__GNUC__) && defined(__cplusplus)) || defined(__INTEL_COMPILER)
226 #    define PERL_UNUSED_DECL
227 #  else
228 #    define PERL_UNUSED_DECL __attribute__((unused))
229 #  endif
230 #else
231 #  define PERL_UNUSED_DECL
232 #endif
233
234 #ifndef dNOOP
235 #  define NOOP (void)0
236 #  define dNOOP extern int Perl___notused PERL_UNUSED_DECL
237 #endif
238
239 #ifndef dTHR
240 #  define dTHR          dNOOP
241 #endif
242
243 #ifndef dTHX
244 #  define dTHX          dNOOP
245 #  define dTHXa(x)      dNOOP
246 #  define dTHXoa(x)     dNOOP
247 #endif
248
249 #ifndef pTHX
250 #    define pTHX        void
251 #    define pTHX_
252 #    define aTHX
253 #    define aTHX_
254 #endif         
255
256 #ifndef dAX
257 #   define dAX I32 ax = MARK - PL_stack_base + 1
258 #endif
259 #ifndef dITEMS
260 #   define dITEMS I32 items = SP - MARK
261 #endif
262
263 /* IV could also be a quad (say, a long long), but Perls
264  * capable of those should have IVSIZE already. */
265 #if !defined(IVSIZE) && defined(LONGSIZE)
266 #   define IVSIZE LONGSIZE
267 #endif
268 #ifndef IVSIZE
269 #   define IVSIZE 4 /* A bold guess, but the best we can make. */
270 #endif
271
272 #ifndef UVSIZE
273 #   define UVSIZE IVSIZE
274 #endif
275
276 #ifndef NVTYPE
277 #   if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE)
278 #       define NVTYPE long double
279 #   else
280 #       define NVTYPE double
281 #   endif
282 typedef NVTYPE NV;
283 #endif
284
285 #ifndef INT2PTR
286
287 #if (IVSIZE == PTRSIZE) && (UVSIZE == PTRSIZE)
288 #  define PTRV                  UV
289 #  define INT2PTR(any,d)        (any)(d)
290 #else
291 #  if PTRSIZE == LONGSIZE
292 #    define PTRV                unsigned long
293 #  else
294 #    define PTRV                unsigned
295 #  endif
296 #  define INT2PTR(any,d)        (any)(PTRV)(d)
297 #endif
298 #define NUM2PTR(any,d)  (any)(PTRV)(d)
299 #define PTR2IV(p)       INT2PTR(IV,p)
300 #define PTR2UV(p)       INT2PTR(UV,p)
301 #define PTR2NV(p)       NUM2PTR(NV,p)
302 #if PTRSIZE == LONGSIZE
303 #  define PTR2ul(p)     (unsigned long)(p)
304 #else
305 #  define PTR2ul(p)     INT2PTR(unsigned long,p)        
306 #endif
307
308 #endif /* !INT2PTR */
309
310 #ifndef boolSV
311 #       define boolSV(b) ((b) ? &PL_sv_yes : &PL_sv_no)
312 #endif
313
314 #ifndef gv_stashpvn
315 #       define gv_stashpvn(str,len,flags) gv_stashpv(str,flags)
316 #endif
317
318 #ifndef newSVpvn
319 #       define newSVpvn(data,len) ((len) ? newSVpv ((data), (len)) : newSVpv ("", 0))
320 #endif
321
322 #ifndef newRV_inc
323 /* Replace: 1 */
324 #       define newRV_inc(sv) newRV(sv)
325 /* Replace: 0 */
326 #endif
327
328 /* DEFSV appears first in 5.004_56 */
329 #ifndef DEFSV
330 #  define DEFSV GvSV(PL_defgv)
331 #endif
332
333 #ifndef SAVE_DEFSV
334 #    define SAVE_DEFSV SAVESPTR(GvSV(PL_defgv))
335 #endif
336
337 #ifndef newRV_noinc
338 #  ifdef __GNUC__
339 #    define newRV_noinc(sv)               \
340       ({                                  \
341           SV *nsv = (SV*)newRV(sv);       \
342           SvREFCNT_dec(sv);               \
343           nsv;                            \
344       })
345 #  else
346 #    if defined(USE_THREADS)
347 static SV * newRV_noinc (SV * sv)
348 {
349           SV *nsv = (SV*)newRV(sv);       
350           SvREFCNT_dec(sv);               
351           return nsv;                     
352 }
353 #    else
354 #      define newRV_noinc(sv)    \
355         (PL_Sv=(SV*)newRV(sv), SvREFCNT_dec(sv), (SV*)PL_Sv)
356 #    endif
357 #  endif
358 #endif
359
360 /* Provide: newCONSTSUB */
361
362 /* newCONSTSUB from IO.xs is in the core starting with 5.004_63 */
363 #if (PERL_VERSION < 4) || ((PERL_VERSION == 4) && (PERL_SUBVERSION < 63))
364
365 #if defined(NEED_newCONSTSUB)
366 static
367 #else
368 extern void newCONSTSUB(HV * stash, char * name, SV *sv);
369 #endif
370
371 #if defined(NEED_newCONSTSUB) || defined(NEED_newCONSTSUB_GLOBAL)
372 void
373 newCONSTSUB(stash,name,sv)
374 HV *stash;
375 char *name;
376 SV *sv;
377 {
378         U32 oldhints = PL_hints;
379         HV *old_cop_stash = PL_curcop->cop_stash;
380         HV *old_curstash = PL_curstash;
381         line_t oldline = PL_curcop->cop_line;
382         PL_curcop->cop_line = PL_copline;
383
384         PL_hints &= ~HINT_BLOCK_SCOPE;
385         if (stash)
386                 PL_curstash = PL_curcop->cop_stash = stash;
387
388         newSUB(
389
390 #if (PERL_VERSION < 3) || ((PERL_VERSION == 3) && (PERL_SUBVERSION < 22))
391      /* before 5.003_22 */
392                 start_subparse(),
393 #else
394 #  if (PERL_VERSION == 3) && (PERL_SUBVERSION == 22)
395      /* 5.003_22 */
396                 start_subparse(0),
397 #  else
398      /* 5.003_23  onwards */
399                 start_subparse(FALSE, 0),
400 #  endif
401 #endif
402
403                 newSVOP(OP_CONST, 0, newSVpv(name,0)),
404                 newSVOP(OP_CONST, 0, &PL_sv_no),   /* SvPV(&PL_sv_no) == "" -- GMB */
405                 newSTATEOP(0, Nullch, newSVOP(OP_CONST, 0, sv))
406         );
407
408         PL_hints = oldhints;
409         PL_curcop->cop_stash = old_cop_stash;
410         PL_curstash = old_curstash;
411         PL_curcop->cop_line = oldline;
412 }
413 #endif
414
415 #endif /* newCONSTSUB */
416
417 #ifndef START_MY_CXT
418
419 /*
420  * Boilerplate macros for initializing and accessing interpreter-local
421  * data from C.  All statics in extensions should be reworked to use
422  * this, if you want to make the extension thread-safe.  See ext/re/re.xs
423  * for an example of the use of these macros.
424  *
425  * Code that uses these macros is responsible for the following:
426  * 1. #define MY_CXT_KEY to a unique string, e.g. "DynaLoader_guts"
427  * 2. Declare a typedef named my_cxt_t that is a structure that contains
428  *    all the data that needs to be interpreter-local.
429  * 3. Use the START_MY_CXT macro after the declaration of my_cxt_t.
430  * 4. Use the MY_CXT_INIT macro such that it is called exactly once
431  *    (typically put in the BOOT: section).
432  * 5. Use the members of the my_cxt_t structure everywhere as
433  *    MY_CXT.member.
434  * 6. Use the dMY_CXT macro (a declaration) in all the functions that
435  *    access MY_CXT.
436  */
437
438 #if defined(MULTIPLICITY) || defined(PERL_OBJECT) || \
439     defined(PERL_CAPI)    || defined(PERL_IMPLICIT_CONTEXT)
440
441 /* This must appear in all extensions that define a my_cxt_t structure,
442  * right after the definition (i.e. at file scope).  The non-threads
443  * case below uses it to declare the data as static. */
444 #define START_MY_CXT
445
446 #if (PERL_VERSION < 4 || (PERL_VERSION == 4 && PERL_SUBVERSION < 68 ))
447 /* Fetches the SV that keeps the per-interpreter data. */
448 #define dMY_CXT_SV \
449         SV *my_cxt_sv = perl_get_sv(MY_CXT_KEY, FALSE)
450 #else /* >= perl5.004_68 */
451 #define dMY_CXT_SV \
452         SV *my_cxt_sv = *hv_fetch(PL_modglobal, MY_CXT_KEY,             \
453                                   sizeof(MY_CXT_KEY)-1, TRUE)
454 #endif /* < perl5.004_68 */
455
456 /* This declaration should be used within all functions that use the
457  * interpreter-local data. */
458 #define dMY_CXT \
459         dMY_CXT_SV;                                                     \
460         my_cxt_t *my_cxtp = INT2PTR(my_cxt_t*,SvUV(my_cxt_sv))
461
462 /* Creates and zeroes the per-interpreter data.
463  * (We allocate my_cxtp in a Perl SV so that it will be released when
464  * the interpreter goes away.) */
465 #define MY_CXT_INIT \
466         dMY_CXT_SV;                                                     \
467         /* newSV() allocates one more than needed */                    \
468         my_cxt_t *my_cxtp = (my_cxt_t*)SvPVX(newSV(sizeof(my_cxt_t)-1));\
469         Zero(my_cxtp, 1, my_cxt_t);                                     \
470         sv_setuv(my_cxt_sv, PTR2UV(my_cxtp))
471
472 /* This macro must be used to access members of the my_cxt_t structure.
473  * e.g. MYCXT.some_data */
474 #define MY_CXT          (*my_cxtp)
475
476 /* Judicious use of these macros can reduce the number of times dMY_CXT
477  * is used.  Use is similar to pTHX, aTHX etc. */
478 #define pMY_CXT         my_cxt_t *my_cxtp
479 #define pMY_CXT_        pMY_CXT,
480 #define _pMY_CXT        ,pMY_CXT
481 #define aMY_CXT         my_cxtp
482 #define aMY_CXT_        aMY_CXT,
483 #define _aMY_CXT        ,aMY_CXT
484
485 #else /* single interpreter */
486
487 #define START_MY_CXT    static my_cxt_t my_cxt;
488 #define dMY_CXT_SV      dNOOP
489 #define dMY_CXT         dNOOP
490 #define MY_CXT_INIT     NOOP
491 #define MY_CXT          my_cxt
492
493 #define pMY_CXT         void
494 #define pMY_CXT_
495 #define _pMY_CXT
496 #define aMY_CXT
497 #define aMY_CXT_
498 #define _aMY_CXT
499
500 #endif 
501
502 #endif /* START_MY_CXT */
503
504 #ifndef IVdf
505 #  if IVSIZE == LONGSIZE
506 #       define  IVdf            "ld"
507 #       define  UVuf            "lu"
508 #       define  UVof            "lo"
509 #       define  UVxf            "lx"
510 #       define  UVXf            "lX"
511 #   else
512 #       if IVSIZE == INTSIZE
513 #           define      IVdf    "d"
514 #           define      UVuf    "u"
515 #           define      UVof    "o"
516 #           define      UVxf    "x"
517 #           define      UVXf    "X"
518 #       endif
519 #   endif
520 #endif
521
522 #ifndef NVef
523 #   if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE) && \
524         defined(PERL_PRIfldbl) /* Not very likely, but let's try anyway. */ 
525 #       define NVef             PERL_PRIeldbl
526 #       define NVff             PERL_PRIfldbl
527 #       define NVgf             PERL_PRIgldbl
528 #   else
529 #       define NVef             "e"
530 #       define NVff             "f"
531 #       define NVgf             "g"
532 #   endif
533 #endif
534
535 #ifndef AvFILLp                 /* Older perls (<=5.003) lack AvFILLp */
536 #   define AvFILLp AvFILL
537 #endif
538
539 #ifdef SvPVbyte
540 #   if PERL_REVISION == 5 && PERL_VERSION < 7
541        /* SvPVbyte does not work in perl-5.6.1, borrowed version for 5.7.3 */
542 #       undef SvPVbyte
543 #       define SvPVbyte(sv, lp) \
544           ((SvFLAGS(sv) & (SVf_POK|SVf_UTF8)) == (SVf_POK) \
545            ? ((lp = SvCUR(sv)), SvPVX(sv)) : my_sv_2pvbyte(aTHX_ sv, &lp))
546        static char *
547        my_sv_2pvbyte(pTHX_ register SV *sv, STRLEN *lp)
548        {   
549            sv_utf8_downgrade(sv,0);
550            return SvPV(sv,*lp);
551        }
552 #   endif
553 #else
554 #   define SvPVbyte SvPV
555 #endif
556
557 #ifndef SvPV_nolen
558 #   define SvPV_nolen(sv) \
559         ((SvFLAGS(sv) & (SVf_POK)) == SVf_POK \
560          ? SvPVX(sv) : sv_2pv_nolen(sv))
561     static char *
562     sv_2pv_nolen(pTHX_ register SV *sv)
563     {   
564         STRLEN n_a;
565         return sv_2pv(sv, &n_a);
566     }
567 #endif
568
569 #ifndef get_cv
570 #   define get_cv(name,create) perl_get_cv(name,create)
571 #endif
572
573 #ifndef get_sv
574 #   define get_sv(name,create) perl_get_sv(name,create)
575 #endif
576
577 #ifndef get_av
578 #   define get_av(name,create) perl_get_av(name,create)
579 #endif
580
581 #ifndef get_hv
582 #   define get_hv(name,create) perl_get_hv(name,create)
583 #endif
584
585 #ifndef call_argv
586 #   define call_argv perl_call_argv
587 #endif
588
589 #ifndef call_method
590 #   define call_method perl_call_method
591 #endif
592
593 #ifndef call_pv
594 #   define call_pv perl_call_pv
595 #endif
596
597 #ifndef call_sv
598 #   define call_sv perl_call_sv
599 #endif
600
601 #ifndef eval_pv
602 #   define eval_pv perl_eval_pv
603 #endif
604
605 #ifndef eval_sv
606 #   define eval_sv perl_eval_sv
607 #endif
608
609 #ifndef PERL_SCAN_GREATER_THAN_UV_MAX
610 #   define PERL_SCAN_GREATER_THAN_UV_MAX 0x02
611 #endif
612
613 #ifndef PERL_SCAN_SILENT_ILLDIGIT
614 #   define PERL_SCAN_SILENT_ILLDIGIT 0x04
615 #endif
616
617 #ifndef PERL_SCAN_ALLOW_UNDERSCORES
618 #   define PERL_SCAN_ALLOW_UNDERSCORES 0x01
619 #endif
620
621 #ifndef PERL_SCAN_DISALLOW_PREFIX
622 #   define PERL_SCAN_DISALLOW_PREFIX 0x02
623 #endif
624
625 #if (PERL_VERSION > 6) || ((PERL_VERSION == 6) && (PERL_SUBVERSION >= 1))
626 #define I32_CAST
627 #else
628 #define I32_CAST (I32*)
629 #endif
630
631 #ifndef grok_hex
632 static UV _grok_hex (char *string, STRLEN *len, I32 *flags, NV *result) {
633     NV r = scan_hex(string, *len, I32_CAST len);
634     if (r > UV_MAX) {
635         *flags |= PERL_SCAN_GREATER_THAN_UV_MAX;
636         if (result) *result = r;
637         return UV_MAX;
638     }
639     return (UV)r;
640 }
641         
642 #   define grok_hex(string, len, flags, result)     \
643         _grok_hex((string), (len), (flags), (result))
644 #endif 
645
646 #ifndef grok_oct
647 static UV _grok_oct (char *string, STRLEN *len, I32 *flags, NV *result) {
648     NV r = scan_oct(string, *len, I32_CAST len);
649     if (r > UV_MAX) {
650         *flags |= PERL_SCAN_GREATER_THAN_UV_MAX;
651         if (result) *result = r;
652         return UV_MAX;
653     }
654     return (UV)r;
655 }
656
657 #   define grok_oct(string, len, flags, result)     \
658         _grok_oct((string), (len), (flags), (result))
659 #endif
660
661 #if !defined(grok_bin) && defined(scan_bin)
662 static UV _grok_bin (char *string, STRLEN *len, I32 *flags, NV *result) {
663     NV r = scan_bin(string, *len, I32_CAST len);
664     if (r > UV_MAX) {
665         *flags |= PERL_SCAN_GREATER_THAN_UV_MAX;
666         if (result) *result = r;
667         return UV_MAX;
668     }
669     return (UV)r;
670 }
671
672 #   define grok_bin(string, len, flags, result)     \
673         _grok_bin((string), (len), (flags), (result))
674 #endif
675
676 #ifndef IN_LOCALE
677 #   define IN_LOCALE \
678         (PL_curcop == &PL_compiling ? IN_LOCALE_COMPILETIME : IN_LOCALE_RUNTIME)
679 #endif
680
681 #ifndef IN_LOCALE_RUNTIME
682 #   define IN_LOCALE_RUNTIME   (PL_curcop->op_private & HINT_LOCALE)
683 #endif
684
685 #ifndef IN_LOCALE_COMPILETIME
686 #   define IN_LOCALE_COMPILETIME   (PL_hints & HINT_LOCALE)
687 #endif
688
689
690 #ifndef IS_NUMBER_IN_UV
691 #   define IS_NUMBER_IN_UV                          0x01   
692 #   define IS_NUMBER_GREATER_THAN_UV_MAX    0x02
693 #   define IS_NUMBER_NOT_INT                0x04
694 #   define IS_NUMBER_NEG                            0x08
695 #   define IS_NUMBER_INFINITY               0x10 
696 #   define IS_NUMBER_NAN                    0x20  
697 #endif
698    
699 #ifndef grok_numeric_radix
700 #   define GROK_NUMERIC_RADIX(sp, send) grok_numeric_radix(aTHX_ sp, send)
701
702 #define grok_numeric_radix Perl_grok_numeric_radix
703     
704 #ifdef DEFINE_PPPORT_GLOBALS
705 bool
706 Perl_grok_numeric_radix(pTHX_ const char **sp, const char *send)
707 {
708 #ifdef USE_LOCALE_NUMERIC
709 #if (PERL_VERSION > 6) || ((PERL_VERSION == 6) && (PERL_SUBVERSION >= 1))
710     if (PL_numeric_radix_sv && IN_LOCALE) { 
711         STRLEN len;
712         char* radix = SvPV(PL_numeric_radix_sv, len);
713         if (*sp + len <= send && memEQ(*sp, radix, len)) {
714             *sp += len;
715             return TRUE; 
716         }
717     }
718 #else
719     /* pre5.6.0 perls don't have PL_numeric_radix_sv so the radix
720      * must manually be requested from locale.h */
721 #include <locale.h>
722     struct lconv *lc = localeconv();
723     char *radix = lc->decimal_point;
724     if (radix && IN_LOCALE) { 
725         STRLEN len = strlen(radix);
726         if (*sp + len <= send && memEQ(*sp, radix, len)) {
727             *sp += len;
728             return TRUE; 
729         }
730     }
731 #endif /* PERL_VERSION */
732 #endif /* USE_LOCALE_NUMERIC */
733     /* always try "." if numeric radix didn't match because
734      * we may have data from different locales mixed */
735     if (*sp < send && **sp == '.') {
736         ++*sp;
737         return TRUE;
738     }
739     return FALSE;
740 }
741 #endif /* #ifdef DEFINE_PPPORT_GLOBALS */
742 #endif /* grok_numeric_radix */
743
744 #ifndef grok_number
745
746 #define grok_number Perl_grok_number
747
748 #ifdef DEFINE_PPPORT_GLOBALS
749 int
750 Perl_grok_number(pTHX_ const char *pv, STRLEN len, UV *valuep)
751 {
752   const char *s = pv;
753   const char *send = pv + len;
754   const UV max_div_10 = UV_MAX / 10;
755   const char max_mod_10 = UV_MAX % 10;
756   int numtype = 0;
757   int sawinf = 0;
758   int sawnan = 0;
759
760   while (s < send && isSPACE(*s))
761     s++;
762   if (s == send) {
763     return 0;
764   } else if (*s == '-') {
765     s++;
766     numtype = IS_NUMBER_NEG;
767   }
768   else if (*s == '+')
769   s++;
770
771   if (s == send)
772     return 0;
773
774   /* next must be digit or the radix separator or beginning of infinity */
775   if (isDIGIT(*s)) {
776     /* UVs are at least 32 bits, so the first 9 decimal digits cannot
777        overflow.  */
778     UV value = *s - '0';
779     /* This construction seems to be more optimiser friendly.
780        (without it gcc does the isDIGIT test and the *s - '0' separately)
781        With it gcc on arm is managing 6 instructions (6 cycles) per digit.
782        In theory the optimiser could deduce how far to unroll the loop
783        before checking for overflow.  */
784     if (++s < send) {
785       int digit = *s - '0';
786       if (digit >= 0 && digit <= 9) {
787         value = value * 10 + digit;
788         if (++s < send) {
789           digit = *s - '0';
790           if (digit >= 0 && digit <= 9) {
791             value = value * 10 + digit;
792             if (++s < send) {
793               digit = *s - '0';
794               if (digit >= 0 && digit <= 9) {
795                 value = value * 10 + digit;
796                         if (++s < send) {
797                   digit = *s - '0';
798                   if (digit >= 0 && digit <= 9) {
799                     value = value * 10 + digit;
800                     if (++s < send) {
801                       digit = *s - '0';
802                       if (digit >= 0 && digit <= 9) {
803                         value = value * 10 + digit;
804                         if (++s < send) {
805                           digit = *s - '0';
806                           if (digit >= 0 && digit <= 9) {
807                             value = value * 10 + digit;
808                             if (++s < send) {
809                               digit = *s - '0';
810                               if (digit >= 0 && digit <= 9) {
811                                 value = value * 10 + digit;
812                                 if (++s < send) {
813                                   digit = *s - '0';
814                                   if (digit >= 0 && digit <= 9) {
815                                     value = value * 10 + digit;
816                                     if (++s < send) {
817                                       /* Now got 9 digits, so need to check
818                                          each time for overflow.  */
819                                       digit = *s - '0';
820                                       while (digit >= 0 && digit <= 9
821                                              && (value < max_div_10
822                                                  || (value == max_div_10
823                                                      && digit <= max_mod_10))) {
824                                         value = value * 10 + digit;
825                                         if (++s < send)
826                                           digit = *s - '0';
827                                         else
828                                           break;
829                                       }
830                                       if (digit >= 0 && digit <= 9
831                                           && (s < send)) {
832                                         /* value overflowed.
833                                            skip the remaining digits, don't
834                                            worry about setting *valuep.  */
835                                         do {
836                                           s++;
837                                         } while (s < send && isDIGIT(*s));
838                                         numtype |=
839                                           IS_NUMBER_GREATER_THAN_UV_MAX;
840                                         goto skip_value;
841                                       }
842                                     }
843                                   }
844                                                 }
845                               }
846                             }
847                           }
848                         }
849                       }
850                     }
851                   }
852                 }
853               }
854             }
855           }
856             }
857       }
858     }
859     numtype |= IS_NUMBER_IN_UV;
860     if (valuep)
861       *valuep = value;
862
863   skip_value:
864     if (GROK_NUMERIC_RADIX(&s, send)) {
865       numtype |= IS_NUMBER_NOT_INT;
866       while (s < send && isDIGIT(*s))  /* optional digits after the radix */
867         s++;
868     }
869   }
870   else if (GROK_NUMERIC_RADIX(&s, send)) {
871     numtype |= IS_NUMBER_NOT_INT | IS_NUMBER_IN_UV; /* valuep assigned below */
872     /* no digits before the radix means we need digits after it */
873     if (s < send && isDIGIT(*s)) {
874       do {
875         s++;
876       } while (s < send && isDIGIT(*s));
877       if (valuep) {
878         /* integer approximation is valid - it's 0.  */
879         *valuep = 0;
880       }
881     }
882     else
883       return 0;
884   } else if (*s == 'I' || *s == 'i') {
885     s++; if (s == send || (*s != 'N' && *s != 'n')) return 0;
886     s++; if (s == send || (*s != 'F' && *s != 'f')) return 0;
887     s++; if (s < send && (*s == 'I' || *s == 'i')) {
888       s++; if (s == send || (*s != 'N' && *s != 'n')) return 0;
889       s++; if (s == send || (*s != 'I' && *s != 'i')) return 0;
890       s++; if (s == send || (*s != 'T' && *s != 't')) return 0;
891       s++; if (s == send || (*s != 'Y' && *s != 'y')) return 0;
892       s++;
893     }
894     sawinf = 1;
895   } else if (*s == 'N' || *s == 'n') {
896     /* XXX TODO: There are signaling NaNs and quiet NaNs. */
897     s++; if (s == send || (*s != 'A' && *s != 'a')) return 0;
898     s++; if (s == send || (*s != 'N' && *s != 'n')) return 0;
899     s++;
900     sawnan = 1;
901   } else
902     return 0;
903
904   if (sawinf) {
905     numtype &= IS_NUMBER_NEG; /* Keep track of sign  */
906     numtype |= IS_NUMBER_INFINITY | IS_NUMBER_NOT_INT;
907   } else if (sawnan) {
908     numtype &= IS_NUMBER_NEG; /* Keep track of sign  */
909     numtype |= IS_NUMBER_NAN | IS_NUMBER_NOT_INT;
910   } else if (s < send) {
911     /* we can have an optional exponent part */
912     if (*s == 'e' || *s == 'E') {
913       /* The only flag we keep is sign.  Blow away any "it's UV"  */
914       numtype &= IS_NUMBER_NEG;
915       numtype |= IS_NUMBER_NOT_INT;
916       s++;
917       if (s < send && (*s == '-' || *s == '+'))
918         s++;
919       if (s < send && isDIGIT(*s)) {
920         do {
921           s++;
922         } while (s < send && isDIGIT(*s));
923       }
924       else
925       return 0;
926     }
927   }
928   while (s < send && isSPACE(*s))
929     s++;
930   if (s >= send)
931     return numtype;
932   if (len == 10 && memEQ(pv, "0 but true", 10)) {
933     if (valuep)
934       *valuep = 0;
935     return IS_NUMBER_IN_UV;
936   }
937   return 0;
938 }
939 #endif /* DEFINE_PPPORT_GLOBALS */
940
941 #endif /* grok_number */
942
943 #ifndef PERL_MAGIC_sv
944 #   define PERL_MAGIC_sv             '\0'
945 #endif
946
947 #ifndef PERL_MAGIC_overload
948 #   define PERL_MAGIC_overload       'A'
949 #endif
950
951 #ifndef PERL_MAGIC_overload_elem
952 #   define PERL_MAGIC_overload_elem  'a'
953 #endif
954
955 #ifndef PERL_MAGIC_overload_table
956 #   define PERL_MAGIC_overload_table 'c'
957 #endif
958
959 #ifndef PERL_MAGIC_bm
960 #   define PERL_MAGIC_bm             'B'
961 #endif
962
963 #ifndef PERL_MAGIC_regdata
964 #   define PERL_MAGIC_regdata        'D'
965 #endif
966
967 #ifndef PERL_MAGIC_regdatum
968 #   define PERL_MAGIC_regdatum       'd'
969 #endif
970
971 #ifndef PERL_MAGIC_env
972 #   define PERL_MAGIC_env            'E'
973 #endif
974
975 #ifndef PERL_MAGIC_envelem
976 #   define PERL_MAGIC_envelem        'e'
977 #endif
978
979 #ifndef PERL_MAGIC_fm
980 #   define PERL_MAGIC_fm             'f'
981 #endif
982
983 #ifndef PERL_MAGIC_regex_global
984 #   define PERL_MAGIC_regex_global   'g'
985 #endif
986
987 #ifndef PERL_MAGIC_isa
988 #   define PERL_MAGIC_isa            'I'
989 #endif
990
991 #ifndef PERL_MAGIC_isaelem
992 #   define PERL_MAGIC_isaelem        'i'
993 #endif
994
995 #ifndef PERL_MAGIC_nkeys
996 #   define PERL_MAGIC_nkeys          'k'
997 #endif
998
999 #ifndef PERL_MAGIC_dbfile
1000 #   define PERL_MAGIC_dbfile         'L'
1001 #endif
1002
1003 #ifndef PERL_MAGIC_dbline
1004 #   define PERL_MAGIC_dbline         'l'
1005 #endif
1006
1007 #ifndef PERL_MAGIC_mutex
1008 #   define PERL_MAGIC_mutex          'm'
1009 #endif
1010
1011 #ifndef PERL_MAGIC_shared
1012 #   define PERL_MAGIC_shared         'N'
1013 #endif
1014
1015 #ifndef PERL_MAGIC_shared_scalar
1016 #   define PERL_MAGIC_shared_scalar  'n'
1017 #endif
1018
1019 #ifndef PERL_MAGIC_collxfrm
1020 #   define PERL_MAGIC_collxfrm       'o'
1021 #endif
1022
1023 #ifndef PERL_MAGIC_tied
1024 #   define PERL_MAGIC_tied           'P'
1025 #endif
1026
1027 #ifndef PERL_MAGIC_tiedelem
1028 #   define PERL_MAGIC_tiedelem       'p'
1029 #endif
1030
1031 #ifndef PERL_MAGIC_tiedscalar
1032 #   define PERL_MAGIC_tiedscalar     'q'
1033 #endif
1034
1035 #ifndef PERL_MAGIC_qr
1036 #   define PERL_MAGIC_qr             'r'
1037 #endif
1038
1039 #ifndef PERL_MAGIC_sig
1040 #   define PERL_MAGIC_sig            'S'
1041 #endif
1042
1043 #ifndef PERL_MAGIC_sigelem
1044 #   define PERL_MAGIC_sigelem        's'
1045 #endif
1046
1047 #ifndef PERL_MAGIC_taint
1048 #   define PERL_MAGIC_taint          't'
1049 #endif
1050
1051 #ifndef PERL_MAGIC_uvar
1052 #   define PERL_MAGIC_uvar           'U'
1053 #endif
1054
1055 #ifndef PERL_MAGIC_uvar_elem
1056 #   define PERL_MAGIC_uvar_elem      'u'
1057 #endif
1058
1059 #ifndef PERL_MAGIC_vstring
1060 #   define PERL_MAGIC_vstring        'V'
1061 #endif
1062
1063 #ifndef PERL_MAGIC_vec
1064 #   define PERL_MAGIC_vec            'v'
1065 #endif
1066
1067 #ifndef PERL_MAGIC_utf8
1068 #   define PERL_MAGIC_utf8           'w'
1069 #endif
1070
1071 #ifndef PERL_MAGIC_substr
1072 #   define PERL_MAGIC_substr         'x'
1073 #endif
1074
1075 #ifndef PERL_MAGIC_defelem
1076 #   define PERL_MAGIC_defelem        'y'
1077 #endif
1078
1079 #ifndef PERL_MAGIC_glob
1080 #   define PERL_MAGIC_glob           '*'
1081 #endif
1082
1083 #ifndef PERL_MAGIC_arylen
1084 #   define PERL_MAGIC_arylen         '#'
1085 #endif
1086
1087 #ifndef PERL_MAGIC_pos
1088 #   define PERL_MAGIC_pos            '.'
1089 #endif
1090
1091 #ifndef PERL_MAGIC_backref
1092 #   define PERL_MAGIC_backref        '<'
1093 #endif
1094
1095 #ifndef PERL_MAGIC_ext
1096 #   define PERL_MAGIC_ext            '~'
1097 #endif
1098
1099 #endif /* _P_P_PORTABILITY_H_ */
1100
1101 /* End of File ppport.h */