-print "1..6\n";
+#!perl -w
+use strict;
+use lib 't';
+use Test::More tests => 23;
use Imager qw(:all);
-
init_log("testout/t103raw.log",1);
-$green=i_color_new(0,255,0,255);
-$blue=i_color_new(0,0,255,255);
-$red=i_color_new(255,0,0,255);
+my $green=i_color_new(0,255,0,255);
+my $blue=i_color_new(0,0,255,255);
+my $red=i_color_new(255,0,0,255);
-$img=Imager::ImgRaw::new(150,150,3);
-$cmpimg=Imager::ImgRaw::new(150,150,3);
+my $img=Imager::ImgRaw::new(150,150,3);
+my $cmpimg=Imager::ImgRaw::new(150,150,3);
i_box_filled($img,70,25,130,125,$green);
i_box_filled($img,20,25,80,125,$blue);
open(FH,">testout/t103.raw") || die "Cannot open testout/t103.raw for writing\n";
binmode(FH);
-i_writeraw($img,fileno(FH)) || die "Cannot write testout/t103.raw\n";
+my $IO = Imager::io_new_fd( fileno(FH) );
+ok(i_writeraw_wiol($img, $IO), "write raw low") or
+ print "# Cannot write testout/t103.raw\n";
close(FH);
-print "ok 1\n";
-
open(FH,"testout/t103.raw") || die "Cannot open testout/t103.raw\n";
binmode(FH);
-$cmpimg=i_readraw(fileno(FH),150,150,3,3,0) || die "Cannot read testout/t103.raw\n";
+$IO = Imager::io_new_fd( fileno(FH) );
+$cmpimg = i_readraw_wiol($IO, 150, 150, 3, 3, 0);
+ok($cmpimg, "read raw low")
+ or print "# Cannot read testout/t103.raw\n";
close(FH);
print "# raw average mean square pixel difference: ",sqrt(i_img_diff($img,$cmpimg))/150*150,"\n";
-print "ok 2\n";
# I could have kept the raw images for these tests in binary files in
# testimg/, but I think keeping them as hex encoded data in here makes
open FH, "testout/t103_base.raw"
or die "Cannot open testout/t103_base.raw: $!";
binmode FH;
-my $baseimg = i_readraw(fileno(FH), 4, 4, 3, 3, 0)
+$IO = Imager::io_new_fd( fileno(FH) );
+
+my $baseimg = i_readraw_wiol( $IO, 4, 4, 3, 3, 0);
+ok($baseimg, "read base raw image")
or die "Cannot read base raw image";
close FH;
# each read_test() call does 2 tests:
# - check if the read succeeds
# - check if it matches $baseimg
-read_test('testout/t103_3to4.raw', 4, 4, 4, 3, 0, $baseimg, 3);
-read_test('testout/t103_line_int.raw', 4, 4, 3, 3, 1, $baseimg, 5);
+read_test('testout/t103_3to4.raw', 4, 4, 4, 3, 0, $baseimg);
+read_test('testout/t103_line_int.raw', 4, 4, 3, 3, 1, $baseimg);
# intrl==2 is documented in raw.c but doesn't seem to be implemented
#read_test('testout/t103_img_int.raw', 4, 4, 3, 3, 2, $baseimg, 7);
-sub read_test {
- my ($in, $xsize, $ysize, $data, $store, $intrl, $base, $test) = @_;
- open FH, $in or die "Cannot open $in: $!";
+# paletted images
+SKIP:
+{
+ my $palim = Imager::i_img_pal_new(20, 20, 3, 256);
+ ok($palim, "make paletted image")
+ or skip("couldn't make paletted image", 2);
+ my $redindex = Imager::i_addcolors($palim, $red);
+ my $blueindex = Imager::i_addcolors($palim, $blue);
+ for my $y (0..9) {
+ Imager::i_ppal($palim, 0, $y, ($redindex) x 20);
+ }
+ for my $y (10..19) {
+ Imager::i_ppal($palim, 0, $y, ($blueindex) x 20);
+ }
+ open FH, "> testout/t103_pal.raw"
+ or die "Cannot create testout/t103_pal.raw: $!";
+ binmode FH;
+ $IO = Imager::io_new_fd(fileno(FH));
+ ok(i_writeraw_wiol($palim, $IO), "write low paletted");
+ close FH;
+
+ open FH, "testout/t103_pal.raw"
+ or die "Cannot open testout/t103_pal.raw: $!";
+ binmode FH;
+ my $data = do { local $/; <FH> };
+ is($data, "\x0" x 200 . "\x1" x 200, "compare paletted data written");
+ close FH;
+}
+
+# 16-bit image
+# we don't have 16-bit reads yet
+SKIP:
+{
+ my $img16 = Imager::i_img_16_new(150, 150, 3);
+ ok($img16, "make 16-bit/sample image")
+ or skip("couldn't make 16 bit/sample image", 1);
+ i_box_filled($img16,70,25,130,125,$green);
+ i_box_filled($img16,20,25,80,125,$blue);
+ i_arc($img16,75,75,30,0,361,$red);
+ i_conv($img16,[0.1, 0.2, 0.4, 0.2, 0.1]);
+
+ open FH, "> testout/t103_16.raw"
+ or die "Cannot create testout/t103_16.raw: $!";
+ binmode FH;
+ $IO = Imager::io_new_fd(fileno(FH));
+ ok(i_writeraw_wiol($img16, $IO), "write low 16 bit image");
+ close FH;
+}
+
+# try a simple virtual image
+SKIP:
+{
+ my $maskimg = Imager::i_img_masked_new($img, undef, 0, 0, 150, 150);
+ ok($maskimg, "make masked image")
+ or skip("couldn't make masked image", 3);
+
+ open FH, "> testout/t103_virt.raw"
+ or die "Cannot create testout/t103_virt.raw: $!";
+ binmode FH;
+ $IO = Imager::io_new_fd(fileno(FH));
+ ok(i_writeraw_wiol($maskimg, $IO), "write virtual raw");
+ close FH;
+
+ open FH, "testout/t103_virt.raw"
+ or die "Cannot open testout/t103_virt.raw: $!";
binmode FH;
- my $img = i_readraw(fileno(FH), $xsize, $ysize, $data, $store, $intrl);
- if ($img) {
- print "ok $test\n";
- if (i_img_diff($img, $baseimg)) {
- print "ok ",$test+1," # skip images don't match, but maybe I don't understand\n";
- }
- else {
- print "ok ",$test+1,"\n";
- }
+ $IO = Imager::io_new_fd(fileno(FH));
+ my $cmpimgmask = i_readraw_wiol($IO, 150, 150, 3, 3, 0);
+ ok($cmpimgmask, "read result of masked write");
+ my $diff = i_img_diff($maskimg, $cmpimgmask);
+ print "# difference for virtual image $diff\n";
+ is($diff, 0, "compare masked to read");
+
+ # check that i_format is set correctly
+ my $index = Imager::i_tags_find($cmpimgmask, 'i_format', 0);
+ if ($index) {
+ my $value = Imager::i_tags_get($cmpimgmask, $index);
+ is($value, 'raw', "check i_format value");
}
else {
- print "not ok $test # could not read image\n";
- print "ok ",$test+1," # skip\n";
+ fail("couldn't find i_format tag");
+ }
+}
+
+{ # error handling checks
+ # should get an error writing to a open for read file
+ # make a empty file
+ open RAW, "> testout/t103_empty.raw"
+ or die "Cannot create testout/t103_empty.raw: $!";
+ close RAW;
+ open RAW, "< testout/t103_empty.raw"
+ or die "Cannot open testout/t103_empty.raw: $!";
+ my $im = Imager->new(xsize => 50, ysize=>50);
+ ok(!$im->write(fh => \*RAW, type => 'raw'),
+ "write to open for read handle");
+ cmp_ok($im->errstr, '=~', '^Could not write to file: write\(\) failure',
+ "check error message");
+ close RAW;
+
+ # should get an error reading an empty file
+ ok(!$im->read(file => 'testout/t103_empty.raw', xsize => 50, ysize=>50, type=>'raw'),
+ 'read an empty file');
+ is($im->errstr, 'premature end of file', "check message");
+ open RAW, "> testout/t103_empty.raw"
+ or die "Cannot create testout/t103_empty.raw: $!";
+ ok(!$im->read(fh => \*RAW, , xsize => 50, ysize=>50, type=>'raw'),
+ 'read a file open for write');
+ cmp_ok($im->errstr, '=~', '^error reading file: read\(\) failure', "check message");
+
+}
+
+sub read_test {
+ my ($in, $xsize, $ysize, $data, $store, $intrl, $base) = @_;
+ open FH, $in or die "Cannot open $in: $!";
+ binmode FH;
+ my $IO = Imager::io_new_fd( fileno(FH) );
+
+ my $img = i_readraw_wiol($IO, $xsize, $ysize, $data, $store, $intrl);
+ SKIP:
+ {
+ ok($img, "read_test $in read")
+ or skip("couldn't read $in", 1);
+ is(i_img_diff($img, $baseimg), 0, "read_test $in compare");
}
}
}
$hex =~ tr/ //d;
my $result = pack("H*", $hex);
- print unpack("H*", $result),"\n";
+ #print unpack("H*", $result),"\n";
return $result;
}
-# FIXME: need tests for the datachannel, storechannel and interlace options
# FIXME: may need tests for 1,2,4 channel images
__DATA__
projects / imager.git / blobdiff